CNC is the English abbreviation of computer numerical control technology, and it is also the habitual name of the industry. Machine tools usually require more compressed air, and now there is a customer inquiries about how much air compressors need to be equipped with 20 sets of CNC equipment. In fact, this problem is solved by people who have experience in equipping air compressors in the industry. In this article, we will solve the problem of supporting CNC equipment for the lower air compressor.
Three aspects need to be considered for CNC special air compressors. 20 sets of CNC are recommended to use 37kw air compressors
For 20 CNC machines and equipment, all the terminals will not use the pressure of exhaust gas and gas production at the same time because the details of the air consumption of the equipment are not known. Another is air quality. Considering that these three elements will be better equipped, as a rule of thumb, it is enough to consider the basic requirements of 3m3 exhaust gas. Try a CNC special air compressor with a power of about 37kw.
CNC special air compressor generally uses a pressure of 6 kg
For 20 CNC machine tools, the air consumption of the equipment should not be too large, and the three elements of air replacement, gas production pressure and air quality will not be used at the same time. As a rule of thumb, an air displacement of 3 m3 is sufficient. The 22kw gas tank should have more power, about 1.5 m3. The details are good to be able to do professional calculations because the air consumption of the equipment is different. Another thing is to pay attention to the air pressure, which is generally 6 kg. The longer the pipeline, the greater the pressure drop, and the better the air quality and protection of the CNC special air compressor.
How to choose CNC special air compressor? If the pipeline is too long, a gas storage tank is required
It depends on the product. If all products need to be cooled by the exhaust gas of an air compressor, similar to the mold industry, their gas usage will end up being very high. They need at least a 22kw CNC dedicated air compressor and three air tanks with a volume of 1 m3. Every machine they produce on site is equipped with a dust blower. Try using an air compressor first. Air pressure must be stable at 6 kg. If the duct is too long, you cannot add another air compressor. If the pipe is too long, you will need to buy another gas tank.
To match any product, we need to choose air compressors of different sizes according to different usage conditions. CNC equipment is certainly no exception. Different air consumption and different powers of CNC special air compressors are naturally different.
aircompressormanufacture.com